Skip to Content

Tutorial: How to Etch Acrylic with your Silhouette Curio

Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. Additionally, I may get commissions for purchases made through other affiliate links in this post.

In the crafting small business world, I think that the Silhouette Curio is underutilized! To inspire you to try out a Silhouette Curio in your business  – I’ve invited Jamie from Craft Chameleon over to show us how to etch with the Curio. I’m turning it over to Jamie now:
Up your game and etch your customer’s acrylic items for a value added product with your Silhouette
Curio. This tutorial assumes you have a working knowledge of your curio machine. Let’s get started!

Supplies Needed

Small platform and mats 2, 1 and top mat (1)
Acrylic Shape
Plastic or cardboard template
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com

Tutorial: How to Etch Acrylic with a Silhouette Curio

First set up your small platform with mats 2, 1 and the top cutting mat. This will give you a platform of 4.
Next take your acrylics template and determine where to put it on your mat. This needs to be a precise
location. I used the lower right hand corner. Make sure your mat is very sticky. If the mat is not sticky
your template and acrylic will move which will cause a failure in etching your acrylic. Press the template
down firmly.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Remove the protective coverings on top and bottom of acrylics. If the bottom covering is paper it can be
left on, your option.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Load the platform into the curio and add the etching tool into the first or red section of the cutting head.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Place your acrylic inside the template. Press firmly. Then open your file on the curio software. Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Set up your template and acrylic cut file in your software to match the exact layout on the machine. Remember your rule is your friend in this step. Precision is key!
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Open the Design Page Settings tab. Using the settings shown in the photo below to set up your page. Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Next open the Emboss/Deboss tab.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Select the area to deboss or emboss. I use deboss as my setting.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Now choose the effect you want for that section. I choose the spiral for the leaves. Next you will set the
spacing, the smallest spacing is .004 and will need to be typed into the box. The slider and arrows will
not allow you to go this low.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Continue selecting the various sections you want to etch and the effects. Shown below is the cross hatch
for the lower section of the acrylic.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Move over to the Cut Settings tab. Select the Cut setting followed by the Red Tool 1. Next we will
select the material type for the Red Tool 1.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Choose the metal etch settings for the Red Tool 1. We will modify the settings below to accommodate
the acrylic. Our platform is set to 4, the speed is 6 and the thickness is 17.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Prior to etching, you will want to cut off the cut lines for your template or move it so it will not be etched. Then send your etching job to your curio.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.comNow watch the magic happen!
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.comTutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
When the item is etched carefully remove from the template with debris in place. You do not want that
to get on your mat as it will affect the mat’s stickiness. Once removed from the Curio, clean the surface of the acrylic with water and a soft rag. Now it is complete or ready to embellish. Shown here we used sharpies and a wet magic eraser to add color.
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Now let’s see what you create for your customers using your Silhouette Curio!
Jamie
Craft Chameleon
For more information on purchasing acrylics with etching cut files and coordinating plastic templates please join the Craft Chameleon Blanks Facebook group.
Craft Chameleon
Thanks so much Jamie for stopping in today – I can’t wait to try out etching with my Curio!
Save this post to Pinterest:
Tutorial: Etch Acrylic with your Silhouette Curio - by cuttingforbusiness.com
Click here to cancel reply.

Dynamic frosting and Signage

Saturday 4th of November 2023

Great for ornaments or coasters...

Hadassah

Wednesday 10th of January 2018

Hi. Thank you for this tutorial; I used the instructions to etch my own designs onto acrylic, and made a couple of beautiful projects. Then it stopped etching properly. It seems to me that the blade gets clogged up with acrylic shavings. Either that or it is blunt already, but I think it's the former. Is there a correct way to clean it? I poked at it with a fairly soft wooden toothpick, and it definitely worked somewhat better then, but still didn't finish the project properly. Any advice? And thank you again!!

Christine

Saturday 13th of January 2018

I keep a small can of pressurized air in my craft room for this reason.

Aubrey

Friday 7th of July 2017

Would etching cream work on acrylics?

Christine

Sunday 9th of July 2017

No, etching cream doesn't work on plastics.

debbie

Wednesday 14th of June 2017

Hi Jamie! So, how do you make the template? Did I miss it? That seems like the most important step?

Sheila

Wednesday 24th of May 2017

The does curio cut acrylic.

Christine

Thursday 25th of May 2017

I think you are asking if the Curio will cut acrylic? If so, no, it will not. It can etch it though.