Skip to Content

How to Properly Sand Wood for Painted Wooden Signs

Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. Additionally, I may get commissions for purchases made through other affiliate links in this post.

This post is a bit of a followup to a popular post on Cutting for Business: Why Does Paint Bleed when Using a Vinyl Stencil. I’ve had some readers read that post and email me stating that they are still experiencing bleeding – even after following my tips. Through a little detective work, I emailed several of those readers and found a common cause in every single case: they didn’t know how to properly sand the wood before painting or staining it. Today, let’s look at how to properly sand wood before making a wood sign with your Silhouette or Cricut cutting machine.

Before we start, let’s look at what you’ll need:

  • A wood blank – Need tips to picking great wood? Head to this post.
  • Sandpaper – You’ll need a couple of different grits of sandpaper. The grit refers to how coarse the paper is and is determined by the number of sand granules per square inch of paper. The lower the number, the coarser the paper; the higher the number, the more finer the sandpaper.
  • A palm sander – I use (and love!) my DeWalt palm sander. You can buy it here, or read more about power tools in this blog post.
  • Tack cloth – Tack cloth is used to clean up the particles of dust after sanding. Pick up a multi pack at this link.
  • Safety goggles and a mask – Safety first! Protect your eyes, nose, and mouth from sawdust. Amazon has cheap goggles here and masks here.

How to Properly Sand Wood for Painted Wood Signs

  1. Determine which direction the grain runs on your wood blank. The grain simply refers to the pattern of the wood. You never want to sand against the grain. How to Properly Sand Wood for Painted Wooden Signs - A must read for Silhouette Cameo or Cricut Explore or Maker Crafters - by cuttingforbusiness.com
  2. Starting with a medium coarseness sandpaper, sand in the direction of the wood grain until the surface is smooth to the touch. When making wood signs, I generally use 120 grit or 150 grit sandpaper. (The grit number is printed on the back of the sheet.) Be cautious to make sure that you apply even pressure. It doesn’t matter whether you are sanding by hand or using a palm sander.How to Properly Sand Wood for Painted Wooden Signs - A must read for Silhouette Cameo or Cricut Explore or Maker Crafters - by cuttingforbusiness.com
  3. After your surface is smooth, sand it again with a higher grit sandpaper. This removes fine imperfections that you may not be able to see. For this step, I usually use 220 grit sandpaper. Again, be sure to use even pressure with your sandpaper or palm sander. How to Properly Sand Wood for Painted Wooden Signs - A must read for Silhouette Cameo or Cricut Explore or Maker Crafters - by cuttingforbusiness.com
  4. When you’ve sanded the entire wood blank with your fine sandpaper, use a tack cloth to remove the dust. Keep the tack cloth folded. Use the exposed side to remove the dust from the wood blank. Once that side is full of dust, fold it over to a clean side, and so on. You should get many uses from a single tack cloth. How to Properly Sand Wood for Painted Wooden Signs - A must read for Silhouette Cameo or Cricut Explore or Maker Crafters - by cuttingforbusiness.com

That’s it! Once the dust has been removed, your wood sign blank is ready for staining or painting.

Help out another crafter – save this post to Pinterest:

How to Properly Sand Wood for Painted Wooden Signs - A must read for Silhouette Cameo or Cricut Explore or Maker Crafters - by cuttingforbusiness.com

Click here to cancel reply.

Brett Ehlert

Friday 30th of April 2021

Great post! I'm new to this and still in the process of learning. Thank you sharing your tips.

Christine, Cutting for Business

Tuesday 11th of May 2021

Happy to help!

John in Philly

Thursday 19th of October 2017

Good post! Give some thought to upgrading your dust mask to something like this. 3M 6502QL Rugged Comfort Quick Latch Half Facepiece Reusable Respirator The cost at Amazon is around eighteen dollars, the fit is much better than the disposable, and the exhaust keeps my glasses from fogging. Also you can change the filters to match what you are doing.

Christine

Sunday 22nd of October 2017

Thanks for sharing!

Michelle Maynard

Thursday 19th of October 2017

Hi Christine! I have followed these steps you outlined above when sanding my pine select boards, however, I don't have bleeding issues but when I remove the vinyl stencil the paint or stain pulls up like little wood splinters. Any thoughts as to why this happens?

Thanks! Michelle

Kallie

Thursday 26th of October 2017

I have this issue as well, even when I use a less tacky vinyl! eek!

Christine

Sunday 22nd of October 2017

Hello! Have you tried a stencil film over a vinyl? They are less sticky than vinyl so they don't pull up paint as easily. Here's what I like: Oramask.