I’m super excited to share a new product tutorial with you today! Chemica recently sent me a sample of their Magic Flex heat transfer material to share with Cutting for Business readers! Magic Flex has been available overseas, but is now being stocked in the USA. The material is a heat transfer that puffs up during application for a raised, 3D look. Let’s get to the tutorial.
Magic Flex Heat Transfer Tutorial:
- Create your design and do not mirror it. This bears repeating: Do NOT mirror your Magic Flex material. After cutting the design, you’ll weed it. I had no problems weeding the material. If you are using a Silhouette Cameo 3, I used my autoblade with the standard heat transfer vinyl setting (smooth) and I double cut the material. Here’s what it looks like weeded:
- You’l notice that there is no carrier sheet to transfer the vinyl to your apparel. Instead, you’ll need to use a heat resistant tape or paper like this one. Apply the tape.
- Now, remove the plastic backing so that your design is on the transfer tape or paper.
- You are ready to press using your heat press. I pressed for 30 seconds at 330 degrees using light pressure. You’ll want to be sure to peel the design while it is hot. In the photo below, you’ll see the Magic Flex on the left and regular heat transfer vinyl on the right.
- Here’s some photos of how the Magic Flex looks once applied:
- Here is the same design in regular heat transfer vinyl:
- Here is a side view so that you can see the puffiness:
Do you dislike the snow, too? Download the SVG I created for this tutorial at this link. As always, feel free to use the file for commercial use, but you cannot sell the digital file. The font I used in the design can be found here.
Save this tutorial to Pinterest:
Wishing you many sales,
If you found this information helpful, pass it to another crafty business owner or business owner-to-be by sharing it on your favorite social media. Sharing it is also a great way to find it when you need it again!