Skip to Content

Tutorial: How to Use the Logo It to Line Up Heat Transfer Vinyl Chest Designs

Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. Additionally, I may get commissions for purchases made through other affiliate links in this post.

Today on Cutting for Business, we are going to wrap up the tutorials related to lining up heat transfer vinyl (HTV). If you remember a few weeks ago, I introduced readers to the Tee Square It which will help you line up your HTV designs perfectly and quickly. (You can find those tutorials here and here.) To conclude this series, I will show you how to use the Logo It to line up chest or pocket designs. My Logo It was provided at no cost from Heat Press Essentials.

How to Use the Logo It (Method 1)

  1. Pre-press your shirt.
  2. Place your design onto the shirt in the position you will press it. The actual placement of your chest design will vary depending on the size of the shirt. Tutorial: How to Use the Logo It to Line Up Heat Transfer Vinyl Chest Designs by cuttingforbusiness.com
  3. Place the Logo It over your design by lining up the center mark with the center line of your shirt. To find the center line of your shirt, use the built in ruler at the top of the Logo It tool.
  4. Take note of the placement of your design. In the example below, the large S in my design lines at the 3″ mark vertically and the 3.5″ mark horizontally. When I do the next shirt, I will be able to replicate the exact placement in only seconds. If you are doing a large order, I suggest you record the measurements somewhere that you can find several months later. This can help you if the company calls for 10 more shirts 3 months later, you’ll be able to replicate them quickly and exactly!Tutorial: How to Use the Logo It to Line Up Heat Transfer Vinyl Chest Designs by cuttingforbusiness.com
  5. Remove the Logo It and press your design.

How to Use the Logo It with the Tee Square It (Method 2)

This method is the same as above, but you use your Tee Square it to find the exact center line of your shirt quickly.

  1. Use the Tee Square It to find the center line of your shirt. Remember, a step-by-step tutorial can be found at this linkTutorial: How to Use the Logo It to Line Up Heat Transfer Vinyl Chest Designs by cuttingforbusiness.com
  2. Line up the center line of the Logo It on top of the center line of the Tee Square It. Then, record your measurements for your design. When placing duplicate designs on other shirts, you will be able to line it up in seconds! Tutorial: How to Use the Logo It to Line Up Heat Transfer Vinyl Chest Designs by cuttingforbusiness.com

If you do a lot of company or team logo shirts, faux pocket designs with heat transfer vinyl, or monogram pocket shirts, I think the Logo It is a good investment and costs around $20. Before you go, I have great news for you! 1) If you are attending the All Things Silhouette Conference in November: I will have Tee Square Its, Logo Its, and heat pressing pillows at my booth for you to try out and buy. This is a great way to save on shipping costs! 2) In the coming weeks, I will have all three tools available online for you to purchase. I will make announcements via social media when they are available. Logo Its, Tee Square Its, and heat press pillows are available in my Etsy shop.

If this tutorial was helpful, don’t forget to pin it by hovering over the image below.

Tutorial: How to Use the Logo It to Line Up Heat Transfer Vinyl Chest Designs in your Silhouette or Cricut business by cuttingforbusiness.com

Click here to cancel reply.

Laura

Sunday 16th of April 2017

Happy Easter!!! Where can I purchase the Tee Square?

Christine

Sunday 16th of April 2017

Hi Laura! Happy Easter! Link: http://amzn.to/2pr00Lv

John in Philly

Tuesday 13th of October 2015

Chest design placement has been the largest source of heartburn.

Great idea about recording the location information. Maybe using a text box in your design software file to record the information because you are going to open the file to cut the design again for follow on orders. We also record the type of the garment, and the supplier just in case of a follow on order. We also learned to either write down the font used, or to make a duplicate copy of the text before changing it to a compound path. Thus avoiding the head scratching of what the heck font did we use?

And the first thing I type during the heat transfer design phase are the words "Flip Before Cut!" and I place them large and red and prominent in the design. And based on a small job a couple of days ago I need to add, "And remember to weld the script font before you cut you moron."

Thank you!

Christine

Tuesday 13th of October 2015

John, I also use design notes in many of my files, I love that you do it too! Cut out some adhesive vinyl and put a reminder in your machine to mirror HTV. I have one inside mine and it has saved me (literally) hundreds of dollars! Thanks for sharing your (entertaining) tidbits! Christine